Emergency LED Driver for UFO High Bay
|
184401-UFO-MVD
•
Quick wiring and installation
•
Auto dimming (0/1-10V) of connected load up to 10 times of emergency power
•
High voltage DC output
•
Constant emergency power output
•
Emergency output is convertible between 90 and 180 minutes
•
Auto Test
•
Extremely slim aluminium housing and light in weight, built-in battery
•
IP67 rating, suitable for outdoor and wet applications
Type #
Emergency Power & Output Voltage
184401-UFO-MVD
20W, 300VDC
|
Downloads
|
Product Specs
| Type | 184401-UFO-MVD |
| Lamp type | UFO, High Bay or other waterproof LED luminaires |
| Rated voltage | 220-240VAC 50/60Hz |
| Output voltage | 300V DC |
| Max. Current | 0.04A |
| Rated power | 8.8W |
| Power Factor | 0.5PF |
| Max. Output power | 20W |
| Max. power of 0-10V dimming load | 200W (The luminaire’s minimum dimming power should be less than or equal to the Max. Output power of LED emergency driver.) |
| Battery | Li-ion |
| Charging time | 24 Hours |
| Discharge time | 90 Minutes at full output power (or 180 minutes at half of output power) |
| Charging current | 500mA |
| Life time of module | 5 Years |
| Charging cycles | >1000 |
| Operation temperature | 0-50°C(32°F-122°F) |
| Efficiency | 80% |
| Abnormal protection | Over load, open circuit, inrush, over temperature, charging and discharging, short circuit protection |
| Wire | 0.75-1.5mm² |
| EMC/ standard | EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3 |
| Safety standard | EN 61347-1, EN 61347-2-7 |
| Meas. mm [inch] | L253 [9.96] x W75 [2.95] x 30 [1.18]mm |
|
Purchase No. description 184401-UFO - MVD - XXX 20W or below Input 220-240VAC Dimmable Code No. + emergency power |
|