1) Customer’s requirements
Realize the emergency function for a 9-40W LED Down light without changing the internal wiring of the luminaries’ itself.
Emergency power: 9W
Emergency time: >90mins
Certification requirement: cULus Listed
Target market: North America
2) Phenix’s Best Recommendation: 184901-2
Product picture:
Emergency power: 9W
Output voltage: 10-300V，Perfectly compatible with most both DC LED loads and AC LED emergency power output tubes and bulbs
Constant emergency power output, Automatic output current matching
cULus Listed certification, with two ended external wires and metal conduit
Slim aluminum housing, small size, easy to install
Discharge time: Up to 120 mins at normal temperature (+25°C), 110 mins at high temperature (+50°C) and 95 mins at cold temperature (-5°C).
3) Wiring
Very simple wiring diagram as follows:
4) Customer case sharing
5) Manual Testing after wiring
- Connect the mains power supply, the luminaire goes into the normal mode, the LED test switch’s signal lamp flashes slowly, indicating the battery pack is being charged (the LED signal lamp will be steady on after being fully charged);
- Disconnect the mains power supply and the luminaire goes into the emergency mode. The emergency power is 9W. The LED test switch’s signal lamp is off, indicating that the battery pack is being discharged.
- After the test, press the LED test switch over 3 seconds to exit the emergency mode.
The most remarkable feature of the 18490X-X series is their slim size. Its cross section size of W 30mm X H 22mm was designed exactly in accordance with the sectional dimensions of the slimmest traditional fluorescent electronic ballasts in the world, which solved most customers’ concerns about the size of the led emergency module.
For Phenix Lighting, we always stick to making the best products and serving customers with our professionalism.
Post time: Dec-07-2022